Skip to content

Troubleshooting

This chapter lists the causes of and fixes for common problems in the field, sorted by symptom and by on-screen message. Find the symptom that matches yours and check each step in order.

The manikin keeps disconnecting during class

Section titled “The manikin keeps disconnecting during class”

The most common cause is low manikin batteries. When the batteries get weak, the signal gets weak too.

  1. Open Settings → Manikin & ID Settings.
  2. For each manikin, hover over the battery icon to check the remaining charge (%).
  3. The charge may be low even when the icon is green. Check the % before class and replace the batteries ahead of time.

There are two main causes.

PC sleep · wake-upWhen the PC goes to sleep and wakes up, all the plugged-in dongles can disconnect at once
USB hubIf the hub’s power or connection is unstable, the dongles plugged into that hub disconnect together

When the cause is PC sleep

  • Turn off PC sleep while you run a class.
  • On Windows, the app keeps the PC from going to sleep automatically while the app is running. It does not stop you from putting the PC to sleep yourself or closing the laptop lid. The screen can still turn off, and some laptops go to sleep when the screen turns off.

When the cause is the USB hub, check the following in order.

  1. Hub power check
  2. Hub reconnection to the PC
  3. Dongle reconnection
  4. Contact us if unresolved

After plugging them back in, check in Manage Dongles that a red check mark is shown for each dongle, then reconnect the manikins that disconnected. (Manikin connection)

Only some manikins show up on the search screen

Section titled “Only some manikins show up on the search screen”

Each manikin sends its name and its color number (ID) separately, and the PC must receive both before the manikin is shown in the list. If the signal is weak, only one may be received, and the manikin may not be shown in the list.

  1. Move the missing manikin closer to the PC.
  2. Keep the dongle away from the PC case, the back of the monitor, and metal objects. A USB extension cable helps.
  3. Select Refresh to stop searching, then select it again to start a new search.

It works on the PC, but the tablet can’t connect

Section titled “It works on the PC, but the tablet can’t connect”

The PC’s Windows Firewall is most likely blocking connections from the tablet.

  • If you update to the latest version (Updates and data upload) or reinstall the app, the firewall permission is added automatically.
  • On your organization’s PC, please ask your IT staff to “allow port 5050.” Do not turn the firewall off completely.

For the steps to check, see “Frequently asked questions” in Tablet use.

The tablet screen goes dark and only shows a reconnect button

Section titled “The tablet screen goes dark and only shows a reconnect button”

The tablet is showing the “CPR class has been closed” message.

CPR class has been closedTurn CPR class back on from the PC,then tap the button below.Still can’t find the PC connection. Please try again in a moment.Reconnect123
  1. 1Message title: CPR CLASS on the PC was closed, or the connection to the PC was lost. First, start the app again on the PC.
  2. 2Reconnect: Searches for the PC app again. When it is found, the tablet screen opens again.
  3. 3Error message: The PC app has not been found yet. Wait a moment and select the button again.

If the tablet reconnects to the PC automatically, this message disappears without selecting the button.

First, check the taskbar to see whether CPR CLASS is already running.

If it is not running and no window is shown, a Windows component the app needs (Microsoft Visual C++ Redistributable) may be missing or out of date.

  1. Download and install the latest Visual C++ Redistributable (x64) from the official Microsoft website.
  2. If it says it is “already installed,” select Repair.
  3. Start the app again.
  • If “Your license has been remotely deactivated.” is shown, I.M.LAB deactivated the license on this PC remotely. To use it again, register a license code again. To find out why it was deactivated, please contact contact@imlabworld.com. (License registration)
  • In older versions, a wrong date or time on the PC could deactivate the license. In the latest version, the clock no longer deactivates it. Register again with the same license code (License registration), and update to the latest version as described in Updates and data upload.

If you don’t know the license code or registration fails, please contact contact@imlabworld.com.

On-screen message Meaning and fix
Cannot connect to the server. Please check your internet connection. The app cannot reach the I.M.LAB server. Check the PC’s internet connection. If it is shown even though the internet works, your organization’s security software (firewall) may be blocking it. Please contact your IT staff. (License registration)
Failed to identify this device. Please restart the app and try again. This is not an internet problem. Exit the app completely, start it again, and try again. Only restarting the app fixes it.
Cannot connect to the server. Please check your network or firewall settings. Shown during an update. Check your internet connection and security software (firewall). (Updates and data upload)
Installer unreadable — check antivirus/permissions. Shown during an update. Check that your antivirus software is not blocking the installer.
Failed to rename. / Failed to change the color ID. Check that the manikin is connected, and try again with the manikin close to the PC. (Manikin & ID Settings)
No manikin connected. Connect a manikin first. (Manikin connection)

In Settings → User Guide & Support → Support, you can find our contact details and get remote support.

Phone and email+82 70-5056-3900 · contact@imlabworld.com
Weekdays 10:00–17:30 (Closed on weekends and public holidays) (Korean time, UTC+9)
Error Log SubmissionSends the app’s records to I.M.LAB for finding the cause
Remote Support (Quick Assist)Call first to request it, then select it at the agreed time. Shown only on Windows PCs

For how to send the error log and get remote support, see Other settings.