Cloud Integration
When you enter a 6-character admin code, this PC is shown on the administrator’s CPR cloud dashboard under the device name you set. Without linking, you can still run classes and save results as usual.
Requirements
Section titled “Requirements”- Admin code issued
- Admin code entry
- Device name setup
- Linked
Once linked, this PC also downloads the quiz sets the administrator made in the CPR cloud. The default quiz sets are downloaded even without linking. (Quiz)
How to use
Section titled “How to use”Cloud Integration screen
Section titled “Cloud Integration screen”On a PC that is not linked, the Connect to Administrator window is shown automatically when the Home screen opens. In that case, start from step 2. To link later, select the gear Settings button at the top right of the Home screen, then select Cloud Integration.
- 1Link status: Shows Not linked before linking and Connected after linking.
- 2Connect: Opens the window for entering the admin code.
- 3CPR cloud info: The web address of the CPR cloud, which the administrator uses, and the QR code and store badges for the mobile app. Select the address to open it in a web browser.
Admin code entry
Section titled “Admin code entry”- 1Admin code field: Enter the 6-character code from your administrator. Only letters and numbers can be entered, and lowercase letters change to uppercase.
- 2Connect: Can be selected only after all 6 characters are entered. The code is then checked over the internet, and if it is correct, the device name step opens.
- 3Later: Closes the window without linking. After that, the window is no longer shown automatically on the Home screen, so link from Settings.
Device name setup
Section titled “Device name setup”- 1Device name: The name this PC has on the dashboard. You can enter up to 20 characters, and you cannot use a name that another device linked to the same administrator already uses.
- 2Done: Finishes linking and closes the window.
- 3Back: Goes back to the admin code step. You need to enter the code again.
Device name change and unlinking
Section titled “Device name change and unlinking”- 1Administrator info: Shows the values the administrator entered in the CPR cloud. An empty item is shown as —.
- 2Unlink administrator: Select Unlink in the confirmation window to remove this PC from the administrator’s dashboard. After unlinking, the link window is no longer shown automatically on the Home screen. To link again, start from step 1.
- 3Edit: Enter a new name in the Change Device Name window and select Save. The name shown on the dashboard changes too.
Frequently asked questions
Section titled “Frequently asked questions”It says “Please check your internet connection.”
Linking, unlinking, and renaming require an internet connection. Connect the PC to the internet and select the button again.
It says “This admin code is not registered.”
The admin code you entered is not registered on the server. Check for characters that look alike, such as 0 (zero) and O (letter), or 1 and I, and enter the code again. If the message is still shown, please ask your administrator for the code again.
It says “This name is already in use.”
Another device linked to the same administrator is using that name. Enter a different name, such as “3rd Floor Training Room PC 2.”
It says “An error occurred while verifying.” or “An error occurred while connecting.”
An error occurred while communicating with the server. Check the internet connection and select the button again after a moment.
I selected Later at first, but I want to do it now
You can link from Settings at any time. Select Settings → Cloud Integration → Connect.
There’s no Connect button on the tablet
The tablet has no link button. Linking is done only in the PC app, and once you link on the PC, the link information is also shown on the instructor tablet.
