Skip to content

Display Settings

Set fullscreen, text and button size, the starting side of measurement cards, and the card layout to suit your training room screen and the number of manikins you connect.

Select the gear Settings button at the top right of the Home screen, then select Display Settings.

Display SettingsFullscreen ModeScreen Resolution100%Feedback Mode Simple ViewCell Layout (Row/Column)LayoutAutoFixedProduct of rows × columns must be at least the number ofconnected kits.Row1Column11234
  1. 1Fullscreen Mode: Makes the app fill the whole screen. (Off by default)
  2. 2Screen Resolution: Changes the size of all text and buttons, from 33% to 200%. (100% by default)
  3. 3Feedback Mode Simple View: Shows cards on their large-text side (the back) when measurement starts. (Off by default)
  4. 4Cell Layout (Row/Column): Sets the card layout to Auto or Fixed (you set the rows and columns). (Auto by default)
1

Turn on the Fullscreen Mode switch to make the app fill the whole screen. Turn it off to go back to the normal window.

On a PC, you can also turn it on and off with the F11 key (on a Mac, control + command + F). If you exit the PC app while fullscreen is on, it starts in fullscreen next time too.

2

Select − or + in the Screen Resolution row to change the size one step at a time. The change applies right away. Select the row itself to open the window below.

Display SettingsFullscreen ModeScreen Resolution100%Feedback Mode Simple ViewCell Layout (Row/Column)LayoutAutoFixedProduct of rows × columns must be at least the number ofconnected kits.Row1Column1Screen Resolution33%50%67%75%80%90%100%110%125%150%175%200%CancelConfirm12
  1. 1Size list: Select from 33, 50, 67, 75, 80, 90, 100, 110, 125, 150, 175, and 200%. The current size has a ✔ mark.
  2. 2Confirm: Applies the selected size. Select Cancel to keep the current size.
3

When it is off (the default), measurement cards start on the front. The front shows the manikin silhouette, the rate gauge, and the depth bar.

4/4 connected00:421GOOD110CPM14 / 15Manikin A2WEAK108CPM3 / 12Manikin B3FAST128CPM6 / 16Manikin C4GOOD112CPM11 / 12Manikin D

When it is on, cards start on the back. The back shows only the one-word feedback and two numbers (depth and rate) in large text, so they are easy to read from far away.

4/4 connected00:421GOOD5.5 cm110 CPMManikin A2WEAK4.2 cm108 CPMManikin B3FAST5.6 cm128 CPMManikin C4GOOD5.3 cm112 CPMManikin D1
  1. 1Flip all: Flips all cards at once during measurement. Select a single card to flip only that card.

This setting only decides which side the cards show when measurement starts. Cards you flip during measurement go back to this setting when the assessment ends. To learn how to read the cards, see Feedback Mode.

4
Display SettingsFullscreen ModeScreen Resolution100%Feedback Mode Simple ViewCell Layout (Row/Column)LayoutAutoFixedProduct of rows × columns must be at least the number ofconnected kits.Row3Column212
  1. 1Fixed: Lets you change the Row and Column fields. With Auto, they are grayed out.
  2. 2‹ ›: Select a number from 1 to 10. Rows are the horizontal lines of cards, and columns are the vertical lines.

Example: with 6 manikins connected, Auto automatically places the cards so they are not too stretched and there are few empty cells. On a wide screen this is 2 rows × 3 columns; the result depends on the screen’s aspect ratio.

6/6 connectedStartAssessment1Manikin A2Manikin B3Manikin C4Manikin D5Manikin E6Manikin F

If you set Fixed to 3 rows × 2 columns, the cards are placed exactly that way.

6/6 connectedStartAssessment1Manikin A2Manikin B3Manikin C4Manikin D5Manikin E6Manikin F
Can I make the manikin silhouette always show?

Yes, turn off Feedback Mode Simple View (the default). While it is off, all cards show the front with the manikin silhouette when measurement starts, regardless of cell size or screen resolution. Even if you flip cards to the back during measurement (by selecting a card or the Flip all button), they go back to the front when the assessment ends.

I switched to Fixed, but the layout didn’t change

If the number of cells (rows × columns) is less than the number of connected manikins, not all cards fit, so they are shown in auto layout. Add rows or columns so that rows × columns is at least the number of manikins.

The Fullscreen Mode switch is grayed out and I can’t select it

On a tablet or in a web browser, the switch is grayed out if that browser does not support fullscreen. If you press and hold the switch or hover over it, the message “Not supported in this browser.” is shown.

Can I make it bigger (over 200%)?

No, 200% is the largest value. Any bigger, and buttons would be pushed off the screen, so you could no longer change the size back.

I changed it on the instructor PC, but other devices didn’t change

This is normal. Screen Resolution, Feedback Mode Simple View, and Cell Layout (Row/Column) are saved separately on each device. Set them on that device too.

I turned on Simple View, but the cards on the ready screen didn’t change

Simple View applies only to cards during measurement. When you select Start Assessment, the cards are shown on the back.