Skip to content

App startup

CPR Class is an app you install on a PC. A class always starts in the PC app, and once you register the license at first startup, the Home screen is shown.

PCA PC with the CPR Class app installed.
License codeRegistered once, at first startup. Registration requires an internet connection.
  1. App start
  2. Server loading
  3. License registration
  4. Home

From then on, a PC with a registered license goes straight to the Home screen after the server loads.

1
Loading server..123
  1. 1Logo: The start screen of the CPR Class app.
  2. 2Loading indicator: The app is getting ready.
  3. 3Loading server..: The app is preparing its built-in server. When it is ready, the app moves to the next screen automatically. It takes longer at first startup and right after an update.
2

A PC with no registered license shows the code entry screen. Enter the 10-character code and select Register. For details, see License registration.

3

When the Home screen is shown, the PC is ready. On a PC not linked to the cloud, the Connect to Administrator window is shown. If you do not want to link now, select Later. After that, the window is not shown automatically, so link the PC from the settings. (Cloud Integration)

For the menus on the Home screen, see Home screen.

My PC is stuck on Loading server..

This message is shown until the app’s built-in server is ready. If a copy of the app you started earlier did not close completely and is still running, the app may not move on. If nothing changes after 1 minute, exit the app completely and start it again. If the problem continues, restart the PC and then start the app. If that does not help, please contact us using the contact details in Troubleshooting.

There’s no button to select instructor or student on the PC

This is normal. The PC always runs the class, so it goes straight to the Home screen without a role selection. Instructor or student is selected on the tablet. (Tablet use)