Manikin connection
The dongle plugged into the PC wirelessly searches for manikins that are turned on, and the manikins you select are connected to the app. Only connected manikins are measured in Feedback Mode, Mission Mode, and Quiz, so connect them before class.
Requirements
Section titled “Requirements”How to use
Section titled “How to use”Search button
Section titled “Search button”- 1Search button: Opens the manikin search screen and starts searching right away.
The Search button is on the four screens below. It is not on the Home screen.
Dongle connection check
Section titled “Dongle connection check”If no dongle is plugged in, this window is shown automatically. You can also open it with the Manage Dongles button on the manikin search screen.
- 1Dongle indicators: Each circle is one dongle, and a red check mark means that dongle is plugged in. The number of circles is the maximum number of dongles your license allows.
- 2Connectable manikins: The number of manikins you can connect with the dongles plugged in now. Each dongle connects 5 manikins.
- 3Done: Closes the window.
Manikin selection
Section titled “Manikin selection”- 1Number selected: How many of the found manikins you have selected.
- 2Select All: Selects all the found manikins. When all are selected, it changes to Deselect All.
- 3Manikin rows: Select a row to check it; select it again to clear the check. Each row shows the manikin ID (color circle + number) and the manikin name.
- 4Manage Dongles: Opens the dongle window from step 2.
- 5Refresh: The search is running while this screen is open. Select it to stop searching; select it again to start searching again.
- 6Connect: The red check button at the bottom right. Connects the manikins you selected (step 4).
Row colors and status
Section titled “Row colors and status”Connection progress
Section titled “Connection progress”Selecting the red check button (Connect) in step 3 starts the connection.
- 1(connected / selected): Shows the connection progress. Wait a moment.
- 2Manikin connected: When all are connected, this is shown at the bottom of the screen, and the app automatically goes back to the screen you started from (Feedback Mode, Mission Mode, and so on).
If all the manikins you selected are already connected, the app goes back to the previous screen as soon as you select the button.
Manikin disconnection
Section titled “Manikin disconnection”On the manikin search screen, clear the check on a connected (green) manikin and select the red check button (Connect) (the screen in step 3). Only that manikin is disconnected.
Number of manikins you can connect
Section titled “Number of manikins you can connect”You can connect up to 5 manikins per dongle. The number of dongles you can use depends on your license tier.
| License tier | Dongles | Manikins (max) |
|---|---|---|
| Basic | 2 | 10 |
| Pro | 4 | 20 |
| Premium | 9 | 45 |
Frequently asked questions
Section titled “Frequently asked questions”The screen only shows “No manikin connected.”
This message is shown when no manikins have been found yet. Check that the manikins are turned on, press each manikin’s chest once to wake it up, and then wait a moment or select the Refresh button. If a manikin is still not found, turn it off and on again. Also check in Manage Dongles that a dongle is plugged in.
Only a few manikins show up
Each manikin sends its name and its color number (manikin ID) separately, and both must reach the PC for it to be shown in the list. If the signal is weak, only one of them may get through, and the manikin is not shown. Place the missing manikins close to the PC, select Refresh to stop searching, then select it again to start a new search. For where to place the dongles and more, see Troubleshooting.
The dongle window keeps opening automatically
The dongle window opens automatically when no dongle is plugged in. Plug a dongle into the PC or a USB hub and check that a red check mark is shown in a circle.
Where do I change the color numbers in the list?
You can change them from the gear button at the top right of the Home screen → Manikin & ID Settings. In the list, select the › button to the right of the manikin, then select the color circle on the Manikin Info screen and select a color and number (0–99). The new manikin ID is saved on the manikin, so it is shown the same even when you connect it to another PC.
