Skip to content

Tablet use

When you scan a QR code with a tablet on the same Wi-Fi as the PC, you can view and control the PC app screen in the tablet’s web browser. You do not install the app on the tablet. The running PC app sends the screen, so if you exit the PC app, the tablets stop too.

PCKeep the CPR CLASS app running. For first-time setup, see App startup.
Same Wi-FiThe PC and the tablet must be connected to the same router. The router does not need to be connected to the internet.
Tablet or other PCA web browser and a camera to scan the QR code are required.
  1. PC app launch
  2. QR generation
  3. Tablet scan
  4. Role selection
1
CPR demo videoAED location photoConnect AdditionalTabletView QR Code12
  1. 1Connect Tablet: Located at the very bottom center of the PC Home screen.
  2. 2QR icon: Selecting the button opens the Connect Additional Device (Tablet) window.
2
Connect Additional Device (Tablet)Please check the Wi-Fi name and passwordso the tablet can join the same Wi-Fi.Connected: CPR-CLASS192.168.0.10 · Port 5050Wi-Fi Name (SSID)CPR-CLASSWi-Fi Password••••••••••The information you enter is securely stored on thisdevice and will be auto-filled next time.CancelGenerate QR123
  1. 1Connection status: Shows the network the PC is connected to and the PC address and port 5050.
  2. 2Wi-Fi name and password: On Windows, both are filled in automatically. On Mac, only the name is filled in automatically (enter the password yourself). After you enter it once, it is filled in automatically from then on.
  3. 3Generate QR: Generates the QR codes to scan with the tablet.
3
Connect Additional Device (Tablet)1Wi-Fi ConnectionCPR-CLASS2Join Sessionhttp://192.168.0.10:5050Edit Wi-Fi InfoConfirm123
  1. 1Wi-Fi Connection: Scan this first. The tablet connects to the same Wi-Fi as the PC.
  2. 2Join Session: Scan this next. CPR CLASS opens in the browser. You can also type the address under the QR code into the browser yourself.
  3. 3Edit Wi-Fi Info: Select this to correct the Wi-Fi name or password if it is wrong.
4
InstructorStudent12
  1. 1Instructor: Can select menus to change screens and change settings from the tablet. When the screen changes, the PC and all tablets change together. Can also open the manikin search screen. A password is required.
  2. 2Student: Only follows the PC or instructor screen. Enters without a password.
5
Enter Instructor PasswordEnter the password to access the instructorview.PasswordCancelConfirm123
  1. 1Password field: Enter the instructor password (at least 4 characters).
  2. 2Eye icon: Shows the characters you typed.
  3. 3Confirm: Goes to the Home screen.
6
License Registration PendingWaiting for desktop app authorizationPlease check the desktop application to completelicense registration.This may take a few momentsYour session is saved and ready to go.12
  1. 1Waiting message: Always shown in English, whatever the app language. It means the license has not been registered in the PC app yet.
  2. 2Switch after registration: When you register the license in the PC app, the tablet moves on to the next screen automatically. You do not enter the license on the tablet (License registration).
7
MenuFeedback ModeMission ModeResultsQuizMediaCPR demo videoAED location photo123
  1. 1Menus: Grayed out and cannot be selected. When the instructor selects a menu, the screen changes to match automatically.
  2. 2Log out: Shown instead of the gear button (Settings). Selecting it returns to the role selection screen.
  3. 3Media: Cannot be selected. There is no Edit button and no Connect Tablet button.
8
Access RestrictedThe instructor is working on something else.You will switch automatically when the instructor moves to an allowed screen.12
  1. 1Access restricted: Shown when the instructor opens a screen students cannot see (Settings or the manikin search screen). This is not an error.
  2. 2Automatic switch: When the instructor moves to another screen, the tablet automatically changes to the same screen as the instructor.
SettingsGear button at the top right of the PC Home screen
Instructor View PasswordEnter a new password.
Set“Password has been set.”

The new password must be at least 4 characters long. You are not asked for the old password. For details, see Other settings.

Can I use just a tablet without the PC?

No, the tablet screen is sent by the PC app, so the PC app must be running. You do not install the app on the tablet.

Can I use it if the router has no internet?

Yes, the PC app sends the screen directly to the tablet through the router, so you can use tablets without the internet as long as the PC and the tablets are connected to the same router. The internet is needed only for features where the PC app talks to a server, such as license registration, app updates, uploading training results, and Cloud Integration. Training results recorded without internet are stored on the PC and uploaded once the internet is connected (Updates and data upload).

It says “Incorrect password.”

Check the password again. The same message is also shown when the PC app is not running or the Wi-Fi connection is lost, so also check that the PC app is running and the Wi-Fi is connected.

It says “Please enter the password.” / “Password must be at least 4 characters.”

This is shown when the password field is empty or shorter than 4 characters. Enter at least 4 characters and select Confirm.

The tablet doesn’t show the screen for selecting instructor or student

A role has already been selected on this tablet. To select again, select Log out. The button is at the top right of the Settings screen for instructors, and at the top right of the Home screen for students.

The tablet keeps showing “License Registration Pending”

The license has not been registered in the PC app yet. Register it on the PC first (License registration).

The address won’t open on the tablet
  1. Check that the tablet and the PC are connected to the same Wi-Fi. It is fine if the PC is connected with an Ethernet cable, as long as it is the same router.
  2. Check that the PC app is running.
  3. Open localhost:5050 in a web browser on the PC. If it opens on the PC but not on the tablet, the PC firewall is blocking it. Allow this app’s connections in the firewall, or, if it is your organization’s PC, please ask your IT staff to “allow port 5050.”
Generate QR is grayed out and I can’t select it

If “Not connected to a network” is shown, the PC is not connected to a network by Wi-Fi or Ethernet cable. Connect the PC to the router, then open the window again.

I can’t generate a QR code on the instructor tablet

QR codes can be generated only on the PC. On a tablet, “Not connected to a network” is shown. Generate them from the PC Home screen.

The Wi-Fi name isn’t filled in automatically on Mac

This happens when Location Services is off on the Mac or the app does not have location permission. Select Open Location Settings in the window to allow it, then restart the app. You can also enter the name yourself.

I forgot the instructor password

On the PC, set a new password in Settings → Instructor View Password. You do not need the old password.

The student tablet is stuck on the Access Restricted screen

The instructor is still on Settings or the manikin search screen. When the instructor leaves that screen, the tablet changes automatically.

I want to switch a student to instructor

Select Log out at the top right of the Home screen on the student tablet to return to the role selection screen. Then select Instructor.